Electric hydraulic jack use attention to small details
Category:
NEWS_bak
Industry news
Author:
Source:
Add time:2021-05-05 11:36
The electro-hydraulic jack is a combination of a hydraulic cylinder and an electric pump station. It can perform top, push, pull, squeeze, and other forms of work. Electro-hydraulic jacks are widely used in power maintenance, bridge maintenance, lifting of heavy objects, static pressure piles, foundation settlement, bridges and shipbuilding, especially in the construction of highways and railways, mechanical calibration, and equipment demolition. A hydraulic jack is a jack that uses a plunger or hydraulic cylinder as a rigid jacking element. Its simple structure, light weight, easy to carry, easy to move. Here we introduce the small details that should be noticed when using the electric hydraulic jack.
1. The electro-hydraulic jacks should be wiped clean before use, and the components should be checked for flexibility and damage;
2. The electro-hydraulic jacks should be placed flat before use, they must not be tilted, the bottom should be leveled, and the hydraulic jacks should be tilted or turned over to prevent the foundations from being biased or the load offset.
3. electro-hydraulic jacks in the lifting operation, to choose the appropriate tonnage of electric hydraulic jacks;
4. If the top height of the heavy object needs to exceed the rated height of the electro-hydraulic jack, firstly put a good sleeper under the weight of the electro-hydraulic jack, lower the electro-hydraulic jack, raise the bottom of the electro-hydraulic jack, and repeat the lifting until it is needed. The height of the lift and so on.
Contact Us
Mobile: +86-13967667857
Tel: +86-0576-81746110
Fax: +86-0576-81746183
E-mail: shili@patngk.com
Add: Medical Packaging Industrial Zone,Lupu,Yuhuan,Zhejiang,China
