Maintenance of Worm Gear Winch on sales
Category:
NEWS_bak
Industry news
Worm Gear Winch on sales
Author:
Source:
Add time:2022-12-23 13:18
Worm Gear Winch on sales is often used in harsh conditions. Therefore, daily use will seriously affect its lifespan. Daily maintenance must not be neglected. 1. The inside of the Worm Gear Winch on sales is prone to water ingress, and requires frequent disassembly and maintenance (recommended once a year/once), re-changing butter, and checking gears.
2. If the steel cable of the Worm Gear Winch on sales is broken or broken, it needs to be replaced in time. Check the clutch for slipping. Try to avoid excessive wading. The relay of the winch needs to be checked frequently to see if it is normal, whether there is any burning of the electric shock, and whether the ground wire of the winch should be connected. Reduce the uninterrupted operation of the winch for a long time to avoid overheating the relay.
3. After the Worm Gear Winch on sales is used, the noose must be loosened, rewound, and then put away. If the winch and noose get dirty, be sure to clean them thoroughly. A little lubricant is often used to help prevent rust, otherwise, it will reduce its service life. If the winch is used for a long time at time, it will put an extra load on the battery. Therefore, the battery should also be checked and maintained frequently.
Through the above introduction and analysis of the Maintenance of Worm Gear Winch on sales, hope it helps you.
Contact Us
Mobile: +86-13967667857
Tel: +86-0576-81746110
Fax: +86-0576-81746183
E-mail: shili@patngk.com
Add: Medical Packaging Industrial Zone,Lupu,Yuhuan,Zhejiang,China
