Manipulation of Lashing Winch
Category:
NEWS_bak
Industry news
Lashing Winch
Author:
Source:
Add time:2022-11-25 17:05
Manipulating the Lashing Winch, in a nutshell, can be divided into three steps: installation, anchoring and dragging.
Install. Using Lashing Winch of course starts with installation. Although it is not complicated, it is the most important step, because it is directly related to the subsequent steps and the use of the winch. The most important thing is to pay attention to the condition of the noose drum and ensure that the noose is wound evenly before starting and throughout use.
The specific installation process is as follows: 1. Insert the remote control. Plug the remote control cable end into the winch. Do not let the remote control cable dangle. The driver can operate the remote control from the driver's seat, and wrap the extra wires around the side mirrors, which makes it much more convenient to work.
2. Pull the noose, use the remote to release the noose a little, and then open the noose hook installed on the side of the Lashing Winch. Open the clutch. Note, be sure to open the hook before opening the clutch.
3. Hold the noose hook by hand. As you pull the noose off the drum, hold the hook with one hand, and no matter how long you pull the noose, you won't be able to reach the hook. After pulling the noose to the fulcrum, lock the clutch. Lashing Winch is ready.
Through the above introduction and analysis of the Manipulation of Lashing Winch, hope it helps you.
Contact Us
Mobile: +86-13967667857
Tel: +86-0576-81746110
Fax: +86-0576-81746183
E-mail: shili@patngk.com
Add: Medical Packaging Industrial Zone,Lupu,Yuhuan,Zhejiang,China
